Product Name:DOW CMS RO Membrane Brand Pure Water Treatment Plant for Food Beverage Industry
What are some common issues that can affect the performance of an RO system?
Several common issues can affect the performance of a reverse osmosis (RO) system:
Fouling of the RO membrane: Over time, contaminants can build up on the surface of the RO membrane, reducing its effectiveness and slowing down the flow of water through the system.
Scaling: Minerals and other dissolved solids can accumulate on the surface of the RO membrane, causing scaling that reduces the efficiency of the system and can even damage the membrane over time.
Inadequate pre-filtration: If the water is not properly pre-filtered, large particles and sediment can clog or damage the RO membrane, reducing its effectiveness.
High water temperature: Higher water temperatures can reduce the efficiency of the RO membrane, as the increased temperature can cause the membrane to become more permeable to contaminants.
Low water pressure: If the water pressure entering the RO system is too low, it can reduce the flow rate through the system and limit the amount of purified water that can be produced.
Improper maintenance: Regular maintenance, such as replacing filters and cleaning the system, is necessary to ensure optimal performance of an RO system. Neglecting maintenance can lead to reduced efficiency and even system failures.
Contamination of purified water: If the storage tank or delivery system is not properly maintained, it can lead to contamination of the purified water, reducing its quality and potentially causing health problems.
The Partial Product Specification:
| Type | Capacity (M3/H) | Pipe DN (mm) | WP (MPa) | Material | Work Method |
| CY-RO-0.25 | 0.25 | DN20 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-0.5 | 0.5 | DN20 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-1 | 1 | DN25 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-2 | 2 | DN32 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-3 | 3 | DN40 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-5 | 5 | DN50 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-10 | 10 | DN75 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-20 | 20 | DN100 | ≤1.6 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-30 | 30 | DN125 | ≤1.6 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-40 | 40 | DN150 | ≤1.6 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-50 | 50 | DN200 | ≤1.6 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
FAQ:
1.Question:How often should I replace the filters in a reverse osmosis system?
Answer:As a general guideline, it's recommended that the pre-filter and post-filter be replaced every 3-6 months.
2.Question:How to maintain the big capacity Reverse Osmosis System ?
Answer: 1.Regularly check the system for leaks 2.Monitor water pressure 3.Inspect and clean the pre-filters.
3.Question: How to install RO Plant?
Answer:Install the RO system equipment, including pre-filters, pumps, membranes, and post-filters, according to the manufacturer's instructions and any applicable regulations,we can provide video by wechat ,whatsapp number on-line .
4.Question: Where is the CHONGYANG Water located ?
Answer: SHANGHAI ,JIANGSU
Product Tags:
|
|
DOW CMS Reverse Osmosis Water Purifier Food And Beverage Pure Water Treatment Images
|
